1.Repair:Paint glue evenly on cloth, and hung to half one minute, then paste fabric swatches attached to the pasting place, flattened and make it don't become warped edge, paste is completed.
2.Inflatable products is cut: drawn mouth longer than 5cm should be in the sewing sewing, then with a cloth or fabric swatches paste; designated port is less than 5cm can be directly pasted.
3.Seam split: first with a needle and thread to opening of the joint formation, or from the bottom of the air cushion apart into and sutured to the, paste available to opening processing firm, also consider beautiful.
4.Beautify become warped edge: apply glue to beautify the place in the warped edge with a small brush, pause after press, can be pasted firmly.
5. Degumming:the part where easy to wear easy to come to be degummed after used for a long time, cloth can be cut into different shapes and then can be pasted at the degumming place.
6, Large leakage volume: after use inflatable products for a long time, because some parts of the needle thread is pulled big, leakage volume increase, consider using a cloth paste on joints and reduce air leakage, such as toys are too old, then should be considered retirement, to prevent business problems.
 |
| inflatable bounce house |
 |
| inflatable water slides |
 |
| inflatable water slides |
没有评论:
发表评论