Kiddie rides swing machine fault analysis and solutions

Swing machine will appear in the course of action of some minor problems, finishing some of the swing plane in this common faults and solutions, we want to help.
First, plug in the power swing machine, no response should be.
The controller indicator does not light:
A. No power or socket loose. Solution: Replace the outlet can be resolved floor;
B. The controller assembly line behind the plug loose. Solution: Check the cable assembly connector is loose, re-inserted;
C. controller fuse blown. Solution: Replace the fuse of the same type;
D. controller burned out. Solution: Replace or repair controller;
The controller lights:
A. coin switch wire off. Solution: Re-plug the coin switch line;
B. coin switch wire angle on errors, coins can not hit the wire. Solution: Correct wire, so that the coins can hit the wire;
C. Coin switch does not work, hand toggle wire, can not hear the "beep A" sound. Solution: Coin switch is broken, an internal short circuit, replacing the coin switch;
D. Post coins from coin mouth to not fall into the money box. Solution: currency-adjusted channel on the coin, the coin size can only be replaced by the distance of a coin (up and down), or;
E. controller burned out. Solution: The two lines on the coin switch directly to the touch, swing machine still does not work, it is a bad controller, replace the controller.
Second, coin swing machine plugged in after starting work.
A. Coin meet short-circuiting switch thread. Solution: Coin switch separately insulated, can not meet;
B. coin switch wire wrapped wire. Solution: Coin switch line out from the right, not wrapped wire;
C. Coin switch is broken. Solution: Coin switch is broken, an internal short circuit, replacing the coin switch;
D. controller burned out. Solution: Replace or repair plant controller.
Third, there is music and not shaken.
A. motor head off. Solution: Reconnect;
B. loose belt. Solution: Adjust the belt retreat screws, loosen the screws around P204 bearing uniform retreat, re-tighten the adjustment;
C. motor or bad capacitor. Workaround: After removing the motor belt motor rotation under no-load condition, does not move after it is applied load capacitance burned out, replace the motor or capacitor;
D. Belt bad or broken. Solution: Check the length of the two kinds of belts, and the model for good;
E. bearing damage. Solution: for the same type bearings.
Fourth, the swing plane started shaking big noise.
A. motor belt is too loose or too tight. Solution: before and after adjustment motor;
B. mechanical parts, bearings in oil. Workaround: After the machine starts rocking, roll, every February to March lubrication maintenance time;
C. crank ran to the side and rub onto the metal framework. Workaround: After the correction, and then fixed P205 SHCS bearings.
Fifth, the coin does not go to vote?
Solution: If the electronic coin coin to see if there put one yuan coin coin, coin which has nothing blocked, there is no reversal of the coin switch is good. If an ordinary coin, then see if there is nothing blocked, raised coin coin there is no loose screws.
Sixth, do not swing the dropped coins?
Solution: (1) Open the back cover of the machine look MP3 indicator has not lit, if not bright, look at the machine there are no broken wires, MP3 controller has no bad. (2) If the lights, check the coin there is no interface is disconnected, there is no bad coin switch.
Seven, has been rocking swing machine kept?
Solution: Check the coin switch has not been something to suppress the coin switch wires are not touching together.
Eight button does not ring?
Solution: Check the button on the line have not lost, there is no speaker wire out, there is no bad speaker.
Nine, do not sing?
Workaround: There is no off-line speaker, speaker is not good; the MP3 switch has not opened; power is no power, replace the power supply.